Mr. Coffee ECM160 4-Cup Steam Espresso Machine
I have had this particular machine for on the year. I have got tried some other machines, even any pump. It makes good cappuccinos/lattes when the milk will be steamed properly in the right temperature. If your own only into espresso shots, I would choose a pump motor.
PROS
-Inexpensive, Small
-Frother will be strong, plastic idea is easily-removed
-Quiet (a pump machine)
-Latte artwork hearts (SEE picture)
CONS
-Supplied tamper is just a a bit flattened end from the coffee scooper.
-No frothing pitcher.
-Multiple shots requires de-pressuring the machine.
NOTES
There appears to be a large amount of reviews proclaiming it operates fine initially then after a few years has poor performance or just stops. Ive realized that during typical use, water starts to produce in the actual tank. This is really because you never really use every one of the water inside the tank per brew. This excessive water In my opinion causes it to brew sluggish. What I actually do to relieve this, is brew basic water almost all out into a cup before I take advantage of it. This serves as equally ridding the surplus water and warm up the cup as well as the machine. I additionally vinegar descale per instructions and find it causes it to be better.
Another thing to see is the bean grind/freshness will be directly proportional to the effectiveness of the cleaner wand. If the actual beans are usually old and/or too course the water will brew with the coffee so fast which no pressure built up for the actual steamer wand to work. Likewise when the beans are usually too great or the actual tamp way too hard, the water may have trouble passing thru the espresso and a lot of pressure will build up which isnt great either because of this machine.
Also want to note I added a photo of any latte center I produced, just to prove small latte artwork is fairly possible with this particular machine.Read related article
Tags: Mr. Coffee, reviews